Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 67 items
Maintenance-free with the adoption of a non-seal pump.
We support our customers' molding needs with a wide range of products that accommodate various clamping forces and temperature ranges for injection molding machines. We offer the WTC series for control temperatures up to 90°C and the WMB series for up to 130°C. For more details, please contact us or refer to our catalog.
Water heater (water-soluble expander)
Maintain water temperature at a constant level Can be set up to 100 degrees
The gas consumption of the absorption chiller for commercial facilities has been maintained at about 20% lower than during peak times.
It is a large commercial facility that opened in 2002, using a gas absorption chiller for its air conditioning heat source. Although the condenser and absorber were regularly cleaned with brushes every year, the consumption significantly increased each year until 2005. In the spring of 2006, a chemical cleaning was conducted, resulting in an approximately 20% reduction in annual gas consumption. In response to this, a ball cleaning device was introduced to prevent efficiency decline due to dirt in the heat exchangers.
High-pressure resistant vacuum tube solar water heater. The amount of heat collected by the vacuum tube solar water heater is determined by the amount of sunlight, making it ideal for cold regions.
The "heat pipe solar collector" does not circulate water within the vacuum tubes, eliminating concerns about freezing and allowing for efficient heat collection even with low solar radiation. In the unlikely event that a vacuum tube needs to be replaced, it can be done without stopping the system. It offers high reliability and durability. 【Features】 ○ High efficiency ○ No concerns about freezing ○ Small heat storage capacity for quick startup ○ Minimal heat loss ○ Long-term maintenance of vacuum level For more details, please contact us or download the catalog.
Sufficient design considering the properties of water! Hot water device for temperature control of rolls.
The "Hot Water Device for Rolls" is a hot water system developed for temperature control of rolls. Depending on the capabilities of the rolls themselves, you can freely choose the discharge volume, discharge pressure, heater capacity, and cooling capacity. Special consideration has been given to the properties of water, ensuring that the heater and cooling systems are adequately designed. 【Features】 ○ Freely selectable heater capacity, cooling capacity, discharge volume, and discharge pressure ○ Well-designed heater and cooling systems For more details, please contact us or download the catalog.
Easy assembly on-site! Drop-type panel tank electric water heater.
The "OLM Series" is a panel tank type with an ideal mechanical structure designed for lightweight construction, making it an electric water heater that is easy to assemble on-site due to the combination of square panels. It is particularly suitable for replacing existing water heaters or for installation in locations that are difficult to access due to transportation issues. Please feel free to contact us if you have any inquiries. 【Common Specifications】 ■ Power Supply Voltage: 3-phase 200V (50Hz/60Hz) ■ Hot Water Temperature: Approximately 85℃ ■ Maximum Operating Pressure: Open type ■ Protection Devices: Leakage circuit breaker, temperature overheat prevention device, dry heating prevention device ■ Main Materials: Tank (Stainless Steel SUS444), Body Case (Aluminum), Heating Element (Sheath Heater) *For more details, please download the PDF or feel free to contact us.
World's bestseller compact instantaneous electric water heater, elegantly designed storage electric water heater.
An electric water heater that uses electricity to heat a heater, which in turn heats water to produce hot water. There are two types: the "instant type," which starts heating after turning on the faucet and allows you to use as much hot water as you need without worrying about running out, and the "storage type," which keeps hot water in a highly insulated tank. From ultra-compact, palm-sized models for handwashing to those suitable for shower use, these products have become cost-effective due to mass production worldwide. *For more details, please request materials or download the PDF data.*
![Storage-type electric water heater [EU Energy Label A Rank]](https://image.mono.ipros.com/public/product/image/ce9/2000355234/IPROS62372399081856385637.png?w=280&h=280)
Germany "Super Brand 2018/2019" 【Excellent Insulation Performance】 World Top Share Stiebel Storage Electric Water Heater
A water heater that uses electricity to warm a heater, which in turn heats water to create hot water. A "storage type" that keeps hot water in a tank, allowing you to use hot water at a stable temperature whenever you want. The outer surface of the tank is made with highly effective foam insulation. The structure prevents the hot water inside the tank from cooling down easily, resulting in extremely low standby power consumption compared to equivalent models from domestic manufacturers, earning it an "EU Energy Label A Rank." It is a product with very low environmental impact. Japan Stiebel has after-sales service stores nationwide, ensuring that customers in any region can use the products with peace of mind. Additionally, we maintain a stock of parts for emergencies for a certain period, allowing you to use the product safely for a long time. *For more details, please request materials or view the PDF data available for download.
![[Enhanced Demonstration Area] Showroom Information Opened in June 2022](https://image.mono.ipros.com/public/product/image/e94/2000400892/IPROS58894181339047167059.jpeg?w=280&h=280)
Germany, an advanced environmental country, showcases electric water heaters and heat exchange ventilation systems manufactured by Stiebel Eltron!!
We have established a showroom for you to experience the performance of Stiebel products, their simple and elegant appearance, and their high maintenance ease. In our new showroom, which opened in 2022, we have enhanced the demonstration area. Products on sale are always operational, allowing you to directly check the time to hot water and flow rate for electric water heaters, as well as heat exchange and maintenance ease for ventilation systems. We hope to assist you in creating energy-efficient and comfortable homes and facilities. Feel free to apply for a showroom visit through our website's [Contact Form]. (Reservation required in advance) [Exhibited Products] ■ Electric Water Heaters ・Instantaneous Type ・Storage Type ■ Heat Exchange Ventilation Systems ・LWZ Series (Ducted) ・VLR-70 (Ductless) ・LT-30Reno (For Renovation) ■ Heating ・Storage Heating Units ・Panel Heaters
![Compact Instant Electric Water Heater [with 100V Plug]](https://image.mono.ipros.com/public/product/image/238/2000661629/IPROS35287089538839431460.jpeg?w=280&h=280)
A compact size that does not obstruct wheelchairs even when installed under the sink. An instantaneous electric water heater that requires no standby power and has no water drainage.
It is recommended for installation in elderly care facilities where a storage tank may obstruct wheelchair access, as well as near handwashing stations in general residential entrances, due to its palm-sized and space-saving design. It can also be introduced into existing facilities with a power outlet (3P plug). Comes with a dedicated aerator and aerator housing. Features: - As a tankless instantaneous type, it ensures sufficient space under the sink. - Provides hot water only when needed, eliminating concerns about running out of hot water. - No standby power is required to keep the water warm, significantly reducing power consumption and contributing to savings on utility bills. - Flow control via a dedicated aerator. By attaching the included aerator to the faucet tip, the water flow is designed and controlled, allowing sufficient hot water for handwashing even at low flow rates (1.0 to 1.5 L/min). It can maintain the water temperature at about 15°C higher, ensuring a comfortable handwashing experience without the worry of running out of hot water. - Set sales with automatic faucets have begun. Starting from November 2022, set sales with the automatic faucet "Delman" have commenced. This reduces the time spent selecting faucets, and the touchless automatic faucet is effective for infection control and water conservation.
120t chiller
120t Chilled and Hot Water Unit Manufacturer: Ebara Corporation
Design & manufacturing sales & beauty, total coordination with high development and technical capabilities.
At Fine Tech Co., Ltd., we conduct total system coordination based on our high development and technical capabilities through the design and manufacturing sales of various machinery, equipment, and control devices in the manufacturing sector. We have also entered the environmental business, providing electric water heaters, recycling-type waste disposal machines, and more. In addition to our design and manufacturing of various equipment, we are committed to regional revitalization and contribution, supporting the development of young talent through the beauty industry. 【Business Overview】 ■ Design, manufacturing, and sales of electrical control equipment ■ Design and manufacturing sales of automatic control devices for various machinery and equipment ■ Design, construction, and maintenance of electrical work ■ Sales of office and household electrical products and electronic components ■ Development, manufacturing, and sales of computer software, etc. *For more details, please download the PDF or feel free to contact us.
High-efficiency vacuum-type hot water heating system with minimal heat loss!
The "BSL Series" is a vacuum-type hot water heating system that does not fall under the "Boiler and Pressure Vessel Safety Regulations" and does not require qualifications or inspections. Due to the vacuum inside the heater, corrosion is unlikely to occur, and there is no scale buildup, resulting in a long lifespan. Additionally, there is no risk of explosion or damage in principle, and since a certain amount of heat transfer water is sealed inside the canister, there is no concern about dry firing. *For more details, please contact us.*
![Heater [Case Study: Hot Water Heater for Aircraft]](https://image.mono.ipros.com/public/product/image/cd8/2001536501/IPROS6832456606831485162.png?w=280&h=280)
Space-saving led to weight reduction! An example that also resulted in an increase in the number of seats.
We would like to introduce a case study of the implementation of a "compact hand-washing hot water unit" for companies that provide aircraft-related products (interior components, seats, aircraft equipment) and aircraft facilities. The company faced challenges such as "wanting to achieve weight reduction due to rising fuel costs" and "wanting to increase the number of seats through space-saving measures." After the implementation, the hand-washing unit was made more compact, leading to an increase in the number of seats. 【Case Overview】 ■Challenges - Wanting to achieve weight reduction due to rising fuel costs - Wanting to increase the number of seats through space-saving measures ■Solution: Development of a compact hot water unit for aircraft ■Effect: Reduction in fuel costs due to miniaturization *For more details, please download the PDF or feel free to contact us.
[All 7 case studies are now available] Case studies of Tomoe Boiler's hot water heater "Tomoe Legacy T-Shift" are published! High efficiency of 92% and outdoor installation available!
The "Case Study Collection of Water Heaters" is a compilation of case studies featuring the Tomoe Legacy and Tishift water heaters from Tomoe Shokai. It introduces examples such as high-efficiency models and those suitable for outdoor installation, along with the prices of the cases. 【Featured Cases】 ■ Installation of a compact and high-efficiency water heater for energy savings (Childcare Facility) ■ Multiple installations with proportional combustion as a standard style for energy savings and improved durability (Company Dormitory) ■ Cost reduction with compact casing for outdoor installation (Accommodation Facility) The collection includes a total of 7 case studies. *Please view the PDF of the case study collection via download.
